Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND

Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND

Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND

Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND

Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND

Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND  Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND

As the original developers, engineers and enthusiasts who brought the VAG induction hose line to the market, Forge Motorsport is pleased to announce a completely retooled, redesigned, and reengineered range of induction hoses for all VAG 1.8T applications. The first hose released from this new range is the induction hose for 1.8T Golf's, Jetta's, GTI's, New Beetle Turbo S's and Seat Leon (not Leon Cupra R).
This hose fits all of the following engine codes on the above mentioned vehicles: AWW - AWD - AWP - AUM - APP - AWU - AUQ. These engine codes require a small blanking plug for a port on the hose not used on this engine code. This plug is included at no additional charge. The second hose released from this new range is also an induction hose for 1.8T Golf's, Jetta's, GTI's, New Beetle Turbo S's, Skoda Octavia and Seat Leon (not Leon Cupra R). This however fits all of the following engine codes on the above mentioned vehicles: - APH - AJQ - AGU - ATC Engine Code. It is possible to identify the code of the engine fitted within your vehicle by removing the plastic engine cover by rotating the plastic bolts securing the cover by 90 degrees. The engine code (made up of three letters) should then become visible on the left hand side or rear of the engine (depending on your application) as you are stood at the front of the vehicle. These hoses have been designed and manufactured with the utmost care given to quality and performance. The silicone compound used in the construction of the hoses is of the highest sheer strength available and is hand-laid with a polyester reinforcement fabric. The internal surface of the hose is completely smooth and unobstructed and the internal volume of this hose has been increased to provide the highest level of airflow at all points within the power band. We have also taken extra care to ensure consistency between each hose produced, and that each hose includes all of the necessary ports and provisions required for each engine code and application as have often been missing on hoses from other manufacturers. Dyno testing has been performed, by independent reviewer and Forge dealer NGP Racing on their in-house DynoJet dynamometer. Testing was performed on a 2003 Jetta 1.8T with an AWP engine code. The vehicle modifications include: - EVO Cold Air Intake. TT 2.5 Turbo-Back Exhaust. For the benefit of those without engine software modifications, testing was conducted with stock ECU software and also APR's 93 octane software. Dyno runs 1 and 3 compare a baseline (OEM hose) to the addition of the Forge induction hose using the stock ECU as programming. Dyno runs 2 and 4 compare a baseline (OEM hose) to the addition of the Forge induction hose using the APR 93 Octane programming. The results show a 5.82 WHP increase using the stock programming and a 12.26 WHP increase using the APR 93 Octane programming with an SAE correction factor. Each Forge Motorsport Induction Hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select, from the options list above, your colour choice when ordering. Please be aware that these hoses were patterned from right hand drive vehicles. Whilst we believe these to be correct for left hand drive vehicles we suggest that you visually check their suitability, as replacement items, with those fitted to your own vehicle, before attempting installation. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants O. Or air containing oil mist.
The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically. The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES. PLEASE STATE WHAT COLOUR HOSES YOU WOULD LIKE IN THE CHECKOUT COMMENTS CHOOSE FROM BLUE / BLAC K/ RED.

We use DPD 24hr service. Despatch times can vary, depending on what you have ordered. But if the item is going to be delayed longer than 24 hours we will contact you. The item "Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND" is in sale since Wednesday, January 16, 2019. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Other Car Tuning & Styling".

The seller is "darkside-dynamics" and is located in Gloucester. This item can be shipped worldwide.
  • Manufacturer Part Number: FMGOLFIND
  • Brand: Forge Motorsport

Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND  Forge Motorsport Silicone Intake Inlet Hose SEAT LEON CUPRA 1.8T FMGOLFIND