SSXVW262 MILLTEK EXHAUST FOR Seat Leon Cupra 2.0 TSI 1418 Dpipe Decat
SSXVW262 MILLTEK EXHAUST FOR Seat Leon Cupra 2.0 TSI 14>18 Dpipe Decat. MILLTEK EXHAUST FOR Seat Leon Cupra 280 & 290 2.0 TSI (280 & 290PS) 2014>2018 Large-bore Downpipe and De-cat. Type of System : Large-bore Downpipe and De-cat. Pipe Diameter (mm) : 76.2. Additional Info : Must be fitted with a Milltek Sport cat-back system. We will advise you straight away if the item remains available or not so you can proceed with your order. Company history and other general information about Milltek Sport. More than 34 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate Milltek Sport range of performance products, offering an ever-expanding comprehensive selection of performance exhausts which build on the successes of key marques like.
Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek exhausts are designed, developed and manufactured in-house in the UK. The VW / Audi Group (VAG Group). From our legendary 3 Audi S4 Bi-Turbo system to our class leading Audi R8 and ground breaking VW systems, Milltek Sport is the proven product of choice delivering clear advantages in power, drivability and sound when compared to the competition.The dramatic success of the Audi/Volkswagen family of products being firmly established as sporting vehicles, lead Milltek Sport to build a wide range of products which cover models from the early Golf GTi's through Audi UR quattro to the current Audi RS3 and Mk6 Golf R. Through Milltek Sport's network of distributors and tuning companies around the world, products are being continually developed to offer'hard edge' performance with discrete looks and sound. In the last 12 months, Milltek Sport have developed performance exhaust systems for many exciting new models including the new Audi A1, Audi A5/S5 Sportback, Audi R8 V10 GT, Audi RS3, Bentley Continental GT / GTC, SEAT Ibiza Bocanegra, SEAT Leon Cupra R 265PS, VW Polo GTi and, Porsche's latest 997.2 Turbo. Many of these vehicles have had the unique Milltek Sport Hi-Flow catalyst and down pipe assemblies developed for the maximum reduction in back-pressure - developed and tested through close co-operation with racing teams in series such as the Britsh Touring Car Championship and the Volkswagen Racing Cup. Models such as the Mini Cooper and Cooper S are developed for worldwide distribution, rigorously tested on the rolling road and through many miles of subjective analysis. Milltek Sport look at a tailpipe styling, ease of fitment, vehicle specifications and power variances to deliver a quality, durable and, responsibly-engineered range of products to suit all environments. Recent additions to the range include the BMW 130i and 1 M Coupé, Mazda RX-8, Mercedes SL55 AMG, Mercedes C63 AMG, Mini Cooper S Coupé and Countryman Cooper S All4, Range Rover Sport 3.0TDV6 and, Vauxhall Corsa VXR Nürburgring.
Milltek Sport doesn't just develop systems for petrol-engined vehicles either; recently the Range Rover Evoque and VW/Audi 2.0 and 3.0 TDi systems were developed giving a useful performance increase and greatly improved'spool up' of the engine due to the larger pipe diameters and reduced back pressure. Close co-operation with car manufacturers and dealers allows Milltek Sport to develop performance exhaust and Hi-Flow catalyst solutions right at the beginning of the vehicle life. Milltek Sport is run by car fanatics - our reputation has grown out of our continual quest for knowledge, supported by a meticulous attention to detail.
Frequently Asked Questions about Milltek Sport exhausts. A selection of the most common questions that we get asked frequently from fitting the system, performance information and cleaning tips. What sort of power gain can I expect to get? Each car has its own characteristics, and the power gain can vary greatly between them.8-10% is about the most accurate general figure to cover all variations. What does it mean when you state the Pipe Diameter? Pipe sizes may vary from part-to-part. The pipe diameters we give are intended to be indicative of the system as a whole and do not necessarily mean every part is of a uniform size. I want a sporty sound, but not one that is so loud that it wakes the neighbours or annoy me on a long journey. What sort of sound do your systems produce? As our slogan states,'Performance to blow your mind, not your ears! Our engineers' mission is to find the perfect balance between maximum performance increase while maintaining a responsible noise level. We DO NOT produce boy-racer style exhaust systems that can be heard from miles away. Our systems are designed to appeal to enthusiasts of all levels and the main way of controlling this is by offering resonated and non-resonated versions of most of our systems - see below for further information about the differences between resonated and non-resonated. What is a resonator and what's the difference between a resonated and non-resonated exhaust system? A resonator is a chamber in the exhaust system that contains a specific volume of air which is designed to cancel out certain frequencies of sound (made by the engine) - making the exhaust noise quieter. Therefore, a non-resonated exhaust system will give you extra performance and a louder exhaust note and the resonated system will give you extra performance without increasing the exhaust noise much. Is it legal to de-cat my car? De-catting a car in the UK registered after 1993 is illegal as it will fail an emissions check. What alternative do I have to a de-cat? A Hi-Flow cat will increase flow by as much as 30% over the original manufacturers unit. Will I need to modify my vehicle in order to fit Milltek products? Our products are direct replacements for the original systems and come with everything needed to fit them. There are some vehicles that may require different rear valances to be fitted to allow tailpipes to exit the rear bumper e. VW Golf Mk4 but this will be made clear to you.
Fitting the systems is very straightforward and can usually be done by any reasonably competent DIY mechanic. However, you could always get a quote from your local garage / Milltek dealer for fitting. Alternatively, you can download our exhaust fitting guide. We do not cover against any modifications made to our product after it has left our factory and also not for unusual use of the parts - for example, the use of Nitrous Oxide (NOS), aftermarket launch-control systems, damage caused by going over a speed bump too fast etc. Our warranties are offered on the understanding that the cars power maybe increased by up to 33% from its original specification but exclude improper modification.We pride ourselves on our after-sales support and customer service and will look into each case on an individual basis. Please note: Milltek Sport hi-flow sports catalysts are manufactured from the highest quality materials and built with maximum performance and longevity in mind. However, they are designed to work specifically in conjunction with other Milltek Sport products and should not be used on their own (with the OEM exhaust system) or with other manufacturers exhaust systems. How do I clean my stainless steel tailpipes without scratching or damaging them? It is important to note that if you don't clean your tailpipes regularly (and we know that some of you don't :) , they will suffer from discolouration and become harder to clean. Because of the high-quality stainless steel, you will always be able to get them back to looking brand new (without any degradation in the materials), but the longer you've left it without cleaning them, the harder it will be! After several months of testing in all markets and weather conditions, we have released our own Milltek Sport tailored metal polish that will render any stainless steel exhaust system or metal component ready for concours or show duty, with the minimum of effort. Perfect not only for keeping your Milltek system in tip-top condition, but also any other polished or chromed parts on your car or bike! Find out more about Milltek Sport Metal Polish. Substantial weight saving over original equipment systems. Precision, quality controlled manufacture to ISO 9001 standards. Highest quality aircraft-grade stainless steel. Low pressure systems for maximum performance - with no loss of low end torque. Designed and manufactured in the UK. Many thanks for your interest. We pride ourselves on a quality service and we are happy to address any concerns.
The item "SSXVW262 MILLTEK EXHAUST FOR Seat Leon Cupra 2.0 TSI 1418 Dpipe Decat" is in sale since Thursday, March 9, 2017. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Complete Performance Exhausts". The seller is "mjd128" and is located in Leatherhead.
This item can be shipped worldwide.
- Manufacturer Part Number: SSXVW262
- Brand: Milltek