HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F

HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F

HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F

HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F

HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F

HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F

HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F

HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F   HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F

HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F. No corking of the intake valves and intake manifold flaps and that without Bedi cleaning? In addition, no loss of performance? Our TFSI Catch Can Set provides a remedy. Oil vapors are led into the catch tank and collected. No corking of the intake manifold flaps and intake valves. No burning of a lot of oil. Installing the system the combustion becomes cleaner. Suitable with original intake / engine cover. Suitable for all models with all-wheel or front-wheel drive. The wiper water tank does not have to be rebuilt as with other manufacturers and the complete volume of wiping water is still usable - the hoses are already prefabricated in the right length and the connections are pre-assembled - the OEM seal can be taken over / does not have to be processed. Corking of the valve -> tearing of the valves -> This in turn can cause. Engine damage - loss of. Catch tank with chamber structure incl.
Black steel flex cables with racing fittings. Plug & Play Set without adjustment work.
Emission values (Euronorm) will continue to be adhered to. Emptying of the catch tank e. During an oil change from below possible without having to remove the tank. Normally, the oil and water vapours are fed into the intake bridge, where they are ignited and expelled in combination with the fuel-air mixture after entering the combustion chamber. Thanks to the direct injection system of the TSI models, the cylinder heads and valves are no longer flushed with fuel. This means that the fuel regularly used for cleaning is missing, because it is injected directly into the combustion chamber. Thus, massive contamination builds up due to the exhaust gas recirculation in conjunction with the oil and water vapors from the crankcase ventilation. These are deposited on the chambers of the cylinder heads and on the valves. Due to these deposits (corks), the material surface becomes rough, the air flow cross-sections narrow and there is neither optimal air turbulence. If the corking is still low, the performance is noticeably reduced at first and an unrread idle occurs. In addition, there are worse exhaust gas values and higher consumption. In the advanced stage, even the valve train is disturbed by these corks in such a way that the valves sometimes no longer close and thus. There is no compression on the. Affected cylinders, which leads to ignition failures. The corking can also lead to a tearing of the valves. This, in turn, can cause engine damage in the worst case.
The Catch Can Set by HF-Series solves this problem once and for all. A catch tank system does not lead the oil vapours produced during engine operation to the intake tract.
The oil vapors are led into the eponymous catch tank and collected there. Thus, valve corking is reduced. This reduction leads to better engine running and ultimately to the best possible restoration of original performance. In addition, the installation of the system makes the combustion cleaner. Despite the diversion of oil and water vapours into the Catch Can, the emission values (Euronorm) are still complied with.

Is the first point of contact when it comes to fresh air flow in vehicles. Has combined the professional research and production of high-quality intake systems, intercoolers and air duct systems. In addition to the 3D scan of the vehicle periphery for perfect fit, this also includes long test series to combine the optimal components for each individual model. This is how road-legal racing products are created.

If there will be any delays in your order you will be informed within 24-48 hours. The item "HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F" is in sale since Wednesday, December 1, 2021. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Air Intake & Induction\Performance Air Filters". The seller is "haz_motorsport" and is located in GB. This item can be shipped worldwide.
  • Manufacturer Part Number: HGCCVAG03-UK
  • Reference OE/OEM Number: HGCCVAG03-UK
  • Brand: HG Motorsport

HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F   HG Motorsport Oil Catch Can Set For VW Golf MK7 R GTI / Seat Leon Cupra 5F