PFR3-510GBLK POWERFLEX BLACK SERIES Rear Arm Inner Bushes Camber Adjustable
PFR3-510GBLK POWERFLEX BLACK SERIES Rear Arm Inner Bushes Camber Adjustable. TOP RATED DISTRIBUTOR SINCE 2003.
POWERFLEX BUSHES & MOUNTS > BLACK SERIES for RACE & RALLY. Fitting Information: These bushes offer on-car adjustment of the rear camber angles of up to 2 degrees. For a non-adjustable version of this bush please use PFR3-510.
Therefore allowing more and more movement of suspension components and offering less and less control over the suspension geometry. This is the single biggest reason you can instantly tell the difference driving a three year old car compared to a showroom new one. However even new cars will benefit from POWERFLEX bushes because of their superior design they offer much more effective control of the suspension components to a much greater extent than normal rubber items.POWERFLEX for prolonged tyre life. With the technological advances in this material it has been possible to overcome the common problem associated with harder bushes which is increased noise. By correctly engineering the polyurethane compound, bushes can be made 25-30% stiffer than new rubber items but with exactly the same noise absorbing properties. This product has no reviews yet, however see what our buyers say about our other products.. To maintain our service we only select the market leading couriers to deliver our orders. Same Day Dispatch, Monday - Friday. A select few items may have a longer lead time as they may be specially ordered from our manufacturers. For any customers outside the UK mainland, Northern Ireland or Isle of Man, we can arrange, on your behalf, for your items to be delivered via a third party company within the UK who will then deliver directly to you. We want to give you a hassle-free way to return anything, either as a UK or an International customer. We want you to be totally satisfied with your order, so if for any reason its not suitable we are here to help. How do I return an item(s)? Whybee Ltd Gaghills Mill GaghillsRd Waterfoot Rossendale Lancashire BB4 9BB. Returning a parcel from within the United Kingdom. When an item is Faulty. If you item is faulty, you may qualify for a pre-paid label, please contact our customer service team before you return your item for the best way to proceed. If you do not qualify for a free return you can simply send the item back to us via your preferred method, however we do recommend you use a traceable service so that you can track your items. (Only 1 free return per order).
In most cases if you qualify for a Free Return a return label will be sent with your order for your to use. As an International customer, you can return your parcel using any postal service. Once the item arrives back at our warehouse, a member of our customer service team will contact you within 24hrs to discuss the return.And we will be happy to assist you further. During festive and sales periods this may be extended slightly. 1 SUSPENSION BUSHES IN EUROPE! EPTG Ltd (European Polyurethane Technologies Group) was formed in the UK in 1996 to take advantage of the significant advances made in the development of polyurethane in recent years. The company has wide experience of automotive suspension and chassis systems and combining these design skills with advanced polyurethane manufacturing techniques led to the development of the wide range of high performance automotive polyurethane components now known the world over by the product name POWERFLEX. The company operates in a self-contained state of the art factory, manufacturing everything in-house. The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality. The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments.
Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs. For those unfamiliar with this it is an international standard to show that the company operates to a system of quality procedures.For smaller companies this can be straightforward but for a company of our size with complex manufacturing and over 2500 part numbers, it is a big achievement especially as this was done with no major changes to our rigorous quality procedures. We were awarded this on our first assessment inspection with no changes or recommendations to the way the business operates. This is a testament to the way we run the business and especially the people within it. What are suspension bushes for anyway? Suspension bushes are fitted to cars at all points where the vehicle chassis is joined to a moving suspension component. They are fitted to provide a noise and vibration absorbing barrier between the road and you. Why are they made of rubber? Rubber acts as that sound barrier, damping out noise and vibration. Without them cars would feel much harsher and noisier. Rubber is also very very cheap. Do racing cars have rubber bushes?
These are either production based cars adapted for race use or rally cars where the forces on the suspension can be so high that metal joints would break. Can I fit POWERFLEX bushes to my racing car?They will outlast rubber by a factor of ten. They will control the geometry much more accurately during rapid suspension movements and they will reduce tyre wear. Nylon is probably the worst of all worlds. When a suspension arm moves up and down it does not move only up and down but describes an arc. This means that, for example an inner track control arm bush will be required to flex in two dimensions at the same time. In this example a metal bush will allow this movement as will a rubber or POWERFLEX bush. However a nylon bush will allow up and down movement but 100% of the arc loadings will be transferred into the arm and the chassis. This causes arm flexing and can easily cause premature arm failure! Of course nylon has no vibration absorbing characteristics at all, so all vibration is transferred up the already highly stressed arm. If POWERFLEX products are this good why do car manufacturers use rubber and not polyurethane? Polyurethane, as a raw material is about ten times the cost of rubber plus it is more expensive and slower to process. If Ford decided to use polyurethane bushes in their range of cars they would need to find a supplier capable of making literally millions of bushes a year. There is no company in the world (even EPTG Ltd) who could make those sort of quantities. Cars are all about marketing.
We design all bushes using highly accurate measurements taken from genuine OE parts as fitted to the vehicle from new and as a result our parts may not fit aftermarket suspnsion components if they differ from standard. With this in mind if you do have Non-Genuine suspension arms etc. Fitted to your vehicle, we would always advise checking sizing prior to ordering. No, but it depends on the car.Some cars benefit more than others. But there is a fair amount of effort involved in changing bushes so consider changing, for example a front set at one time, followed by the rear ones if applicable. Best to change the whole set if you can afford it though. But we would say that wouldnt we!!
Other items in this category. The item "PFR3-510GBLK POWERFLEX BLACK SERIES Rear Arm Inner Bushes Camber Adjustable" is in sale since Wednesday, October 30, 2019. This item is in the category "Vehicle Parts & Accessories\Car Parts\Suspension & Steering\Bearings, Bushings & Bush Kits". The seller is "strutbracer" and is located in Lancashire. This item can be shipped worldwide.
- Brand: POWERFLEX
- Fitting Information: These bushes offer on-car adjustment of the rear c
- Manufacturer Part Number: PFR3-510GBLK
- Product Type: UPRATED SUSPENSION BUSHES & MOUNTS
- Product Fitments:
• Audi S3 Mk1 Typ 8L 4WD (1999-2003)
- Product Colour: BLACK (95)
- Product Range: BLACK SERIES
- Product Description: Rear Arm Inner Bush Camber Adjustable
- Quantity Required: 4
- Quantity Supplied in Box: 4
- Diagram Reference Number: 5
- Reference OE/OEM Number: 1J0505323L / 1J0505323N /
- Type: Suspension Bushing
- Country/Region of Manufacture: United Kingdom
- Placement on Vehicle: Rear
- ISBN: does not apply
- UPC: does not apply
- EAN: 5055676532374